Glasses with Hearing Aids: Temple Fit and Comfort

Wearing glasses with hearing aids? See which temples leave room behind the ear, the order to put them on and the frame fit that keeps both comfortable.

5 min readBy IGIOO Optical

Woman in profile wearing slim grey metal glasses with the temple resting over her ear
In this story
  1. 01Why the space behind the ear gets crowded
  2. 02Which temple style suits which hearing aid
  3. 03Frame features that make sharing the ear easier
  4. 04The order that works: glasses first, hearing aids second
  5. 05Sizing: get the width right before anything else
  6. 06Small habits that prevent sore spots
  7. 07Frequently asked questions
  8. 08Find a frame that shares the space

Yes, you can wear glasses and hearing aids together comfortably. The space behind your ear is small, so the pair that works best has slim, straight-ish temples that sit flat against the head and leave room for the device. Thin metal and titanium frames are usually the easiest match, and the order in which you put things on matters almost as much as the frame.

Why the space behind the ear gets crowded

A glasses temple and a behind-the-ear hearing aid both want the same few millimetres: the groove where the top of your ear meets your head. When two objects share it, one of three things tends to happen.

  • The temple rides on top of the device, so the glasses tilt or sit higher on one side.
  • The device is pushed outwards and feels loose, or comes away when you take your glasses off.
  • Both press on the same spot and the area feels tender by the afternoon.

None of this means you need special eyewear. It means temple thickness, temple shape and frame weight deserve more attention than they would otherwise get.

Which temple style suits which hearing aid

Hearing aids come in a few broad styles, and each one leaves a different amount of room for a frame. Use this as a starting point, and ask your hearing care professional if you are unsure which style you wear.

Hearing aid style Where it sits Temple to look for
Behind-the-ear Body rests behind the ear, tube runs over the top The thinnest you can find: wire or slim flat metal
Receiver-in-canal Small body behind the ear, fine wire into the canal Thin metal, or a slim acetate arm that narrows at the tip
In-the-ear or in-canal Entirely inside the ear Almost any temple; choose on comfort and style

If your device sits completely inside the ear, you can stop worrying here and simply pick a frame you like from all eyeglasses. For everything worn behind the ear, read on.

Frame features that make sharing the ear easier

Slim temples

A narrow arm takes up less of the groove and slides in beside the device rather than on top of it. Metal frames are the obvious place to look, because a metal temple can be made far thinner than a plastic one without losing strength. Our guide to thin vs thick temples shows how the two look from the side.

Low weight

The lighter the frame, the less it needs to grip behind the ear to stay put. Browse the metal collection or the titanium collection for light full-rim options.

A gentle curve at the tip

Temples that hook sharply behind the ear fight the device for space. A soft, shallow bend that follows the head works better, and an optician can relax the curve on most metal arms in a couple of minutes.

Adjustable nose pads

When the nose carries a fair share of the weight, the ears carry less. Pads on metal arms can be set so the frame sits securely without needing tight temples.

The order that works: glasses first, hearing aids second

Most people who wear both settle on the same routine, and it solves a surprising number of fit complaints.

  1. Put your glasses on first. Let the temple settle against your head, right in the groove.
  2. Add the hearing aid afterwards. Place it so it rests outside the temple, between the arm and the outer ear.
  3. Take glasses off straight forwards. Use both hands and pull directly away from your face. Lifting one side up and sideways is how a device gets flicked off.
  4. Check in a mirror once. The frame should sit level, and the device should not be pushed away from your head.

Some people prefer the reverse, with the device closest to the head. Try both for a day each; ear shapes differ, and the arrangement that feels stable is the right one for you.

Sizing: get the width right before anything else

A frame that is too narrow bows the temples outwards and presses them into the top of the ear, exactly where your device sits. One that is too wide slides forward, so you push it back all day and nudge the device each time. Measure a pair that already fits you well and compare the numbers using our frame size guide. If slipping is your main complaint, this fit check for bridge and temples walks through the usual causes.

Ordering online and unsure how a frame will share the space? Our 14-day fit & style guarantee gives you time to wear the pair with your devices at home; the details are on the returns page.

Small habits that prevent sore spots

  • Keep one everyday pair rather than switching between frames with very different temples; your ears adapt to one shape.
  • Avoid pushing glasses up into your hair. The temples spread and the fit behind the ear loosens.
  • If you wear a face mask, hook the loops on last and unhook them first, slowly.
  • Wipe the temple tips when you clean your lenses. Skin oils make arms slippery, and slippery arms move against the device.
  • Have the temples re-set by an optician if a frame has been sat on or stretched.

Shop this guide

Frequently asked questions

Do I put my glasses or my hearing aids on first?

Glasses first is the routine most wearers find steadier: the temple sits against the head and the device rests outside it. If that feels wrong for your ear shape, try the opposite order for a day and keep whichever stays put.

Are thick acetate frames ruled out?

Not automatically. With in-the-ear devices any temple works. With behind-the-ear devices, a chunky arm takes up a lot of room, so look for acetate temples that taper towards the tip, or choose a frame with an acetate front and metal arms.

Why do my hearing aids come off when I remove my glasses?

Usually because the glasses are lifted off one-handed, at an angle. Slide them straight forwards with both hands and the temple passes the device instead of catching it.

Can an optician adjust the temples to make room?

Yes. Reducing the bend at the tip or changing how closely the arm follows your head is a routine adjustment, particularly on metal frames. Bring your hearing aids to the appointment so the fit is set with both in place.

Find a frame that shares the space

Start with slim metal temples, keep the frame light and settle on one order for putting things on. You will find suitable shapes in our metal eyeglasses and across all eyeglasses. Add your prescription in a few clicks with our lens selector.

News

More from the journal

All stories
Shop the topic

Frames our customers love

View all

Choose a frame, add your prescription and pick your lenses in the next step – free shipping on orders over €99.

Shop now